Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G – iOS 6.0.1 firmware has been released by Apple today with many improvements and fixed bugs, A4 jailbreakers (iPhone 4, 3GS iPod 4G ) who are planning to update their devices to iOS 6.0.1 should take care that only the tethered jailbreak available for A4 devices other wise the A5 jailbreakers who are planning to update to iOS 6.0.1 it’s better to stay way from the update as there is no jailbreak available till now.

Dev team also have updated Redsn0w to version 0.9.15b3 this update doesn’t add support for iOS 6.0.1 firmware it’s only to fix bugs found on the latest version, but you can still point at the already supported iOS 6 firmware and successfully jailbreak iOS 6.0.1 on A4 devices only.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Supported devices

  • iPhone 4.
  • iPhone 3GS.
  • iPod touch 4th generation.
Jailbreak Required

How To Jailbreak iOS 6.0.1 On iPhone 4, 3GS, iPod touch 4G

Step 1: Put your device in DFU mode 

  • Hold down power button and home button both at the same time for 10 seconds
  • After the 10 seconds release the power button and still pressing on the home button for another 10 seconds

Step 2: Connect your device to your computer.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 3: . Open RedSn0w folder after extracting it, and right click on redsn0w file and click “Run as administrator

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 4: Now you have to Click on Extras button

Note: Make sure that Redsn0w detects your device.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 5: Then Select IPSW button , and choose your iOS 6.0 firmware for your device.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 6: Your device should inform you that “The following build was identified

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 7: Then Go back to the “RedSn0w” welcome page and click Jailbreak button then Redsn0w will start processing.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 8: Now check on “install Cydia” as on the screen below and then click “Next” your Redsn0w will start jailbreaking.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 9: Once the jailbreak is complete you have to know that this jailbreak is tethered jailbreak so you have to place your device into DFU mode.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 10: Go back to the Redsn0w main page and click “Extra” button then click “Just boot

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Step 11: After the device reboots, you will see Cydia on the Home screen.

Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

Video guide will show you how to jailbreak iOS 6.0.1 on iPhone 4, 3GS and iPod touch 4G

Be The First one Downloading UnTethered Jailbreak for iOS 6

Get Jailbreak Alert Free

Alert By Google+




Get Jailbreak and Unlock Alerts

Enter your email address:


*IMPORTANT : Check inbox for confirmation mail

Share This Post

Related Articles

420 Responses to “Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G”

  1. stavr0s13 says:

    is that full untethered on a 3gs new bootrom?

  2. Nikos says:

    4s with SHSH 5.1.1 ??

  3. Renner says:

    It doesn’t work for me! when I try to open Cydia, it crashes and don’t open…
    What shoud I do?

  4. Que says:

    Cydia not showing up after all process are complete. Please help get cydia back Iphone4 6.0.1 4.12.2

  5. Eralp says:

    I have iPod touch 4g 6.0.1. I did everything fine until booting. I get error when trying to just booting. It says ”missing keys plist data build” Please help me

  6. Jiri says:

    Same problem with 3GS new bootrom ios 6.0.1 :-(
    ”missing keys.plist data for this build”

  7. TheFro says:

    iPhone 4 8gb….”Missing keys plist” here also… On the “just boot”

  8. wayner20 says:

    I have the exact same problem. Ive gone through the process atleast 10 times following it step by step and it shows walking pineapple. But instead of saying moving applications and all the other things it used to say with other jailbrakes it just goes to reboot and cydia not installed. I have 3gs 05.16.07 factory unlocked. any help would be great.

  9. dani says:

    hi
    i,m sorry , i’m not write english very well.
    before just boot ..exit redsn0w ..exit device cbale..and dfu mod ..wait
    ..open redsnow..extras >> select ipsw >>and now get ios 6.0 for just boot ..connet device in dfu mod ..and next in just boot ..:) redsn0w no show (.missing keys.plist data for this build ) and cydia install.. tnak’s

  10. jimmy says:

    I had the same problem ”missing keys.plist data for this build”. So, the next time, i just did the “SELECT IPSW” thing first and then hit “Just Boot”. It worked like a charm :)

  11. wayner20 says:

    I finally got it. I had saved all apps from app store and installous in ifunbox and since im factory unlocked i restored my phone and it worked like a charm. thank you to all who helped and big thanks to dev team. Keep up the crazy good work.

  12. Lucy says:

    Hi! Is jailbreak to iPad 2 coming soon? I have the latest iOS….and waiting foward that jailbreak ….

  13. corn says:

    I follow instructions above for my iphone 4 jailbreaking ios 6.0.1,all is good and when uploading kernel to reboot..my iphone keeps loading
    Please wait…
    Please wait…
    Please wait…
    Please wait…
    Please wait…
    Please wait…
    etc…
    should i wait?its already 15 minutes..

  14. dennis says:

    same thing happend to me, but be patient, i works after a whie, just wait

  15. dennis says:

    how do you do that ?
    I seriously need help, cuz i’ve spent lik 6 hours over and over again JB:ing my iPhone 4 and i can’t get cydia with the “root” & “alpine” method, always “error” “Can’t connect”

    PLEASE HELP ME IM SICK OF NOT GETTING IR RIGHT

  16. joop says:

    I have been getting the ”missing keys plist data build” also
    i hope that a much clearer step by step instructions might help..
    greatly appreciate it

  17. diablo says:

    thank’s it’s work :D

  18. corn says:

    i will try..and thank you..

  19. TheFroReturns says:

    Well, Heres what i did…..i tried fetching my shsh blobs with TinyUmbrella…then my shsh was different so i downloaded the right firmware(older) which matched that of my shsh and i restored the firmware and matched the shsh in Redsnow-newest version.
    Then it kept relooping in recovery so i had to restore with itunes then the exploit worked….jailbreak….then just boot.
    It booted up and i had cydia.
    I ran a few apps on cydia and installed and when an app in cydia rebooted, it had to be “just booted” again.

    After running redsnow and trying to “just boot” a 2nd time, the error—“missing plist” arose again.

    I tried to reboot with redsnow again, and again, and again….finally it did reboot the right way. possible problem was the way or times i held the buttons when putting it in DFU mode. Good luck to anyone else with the same problem. Try releasing the HOME button at different times with the DFU mode.

    -TheFroInc

  20. Tsz says:

    Thx for your suggestion, I can pass the (.missing keys.plist data for this build ) , however, my iPhone gets stuck in the white apple screen, does anyone hv this problem?

  21. Faizan says:

    I have Iphone 4 (factory unlocked), and have ios 6.0.1. when i try to jailbreak through redsn0w 0.9.15b3 it shows “missing keys.plist data for this build”.. what should i do?
    Please help :)

  22. dani says:

    i,m sorry , i’m not write english very well ..(my keyboards is persian )
    before jailbreak and just boot ..
    open redsn0w >> exras >> select ipsw >> get ios 6.0 (not 6.0.1) and back >>jailbreak in dfu mod >>>>>
    before just boot : close redsn0w >> and open again redsn0w >>..go extras select ipsw (ios 6.0 for iphone 4) and back >> just boot >>connet device in dfu mod and next
    wait for boot and installed cydia

  23. Fatih says:

    Hello, I have an iphone 4 6.0.1. When jailbreaking i waited ‘Please wait…’ like 20 minutes then something more wrote and just rebooted. Then I did Just boot and I am waiting like 20 minutes now but it stuck on pineapple screen. Someone can help?

  24. oscar mendizabal says:

    can´t open it, it says : ipsw not supported by this version of redsnow

  25. jimmy says:

    go to dfu mode, open redsnow, click extras and select IPSW and then click “just boot”; should wok fine

  26. Chancey says:

    Can someone help me?
    I bought a iphone 3GS locked Bell. I need it unlocked
    The guy I bought it off just updated to 6.0 . I tried
    To downgrade to 5.1.1 but had no luck because there
    was no shsh blobs. Then had to revert back to 4.1 to
    unlock it. Then I went to restore via iTunes. Now there
    is 6.0.1 so now I can’t revert to 6.0 because I didn’t
    save the shsh blobs.
    Currently I am on 4.1 with baseband 6.15.00.
    How can I upgrade firmware and unlock when
    I have no saved 5.1.1 or 6.0 shsh blobs saved?
    Could someone please help me

  27. Tina says:

    THANK YOU SO MUCH! I had been working on this all day and was ready to downgrade! Thanks!!! I am going to post this fix to howard forums later & I will give you the credit! Thanks!!

  28. Giovanni says:

    i have the same problem help us

  29. Davey says:

    Agree- it just suddenly worked when I did the ‘JUST BOOT’ after selecting the 6.0 IPSW. I did have ‘Autoboot this device when it connects in DFU Mode ‘ selected. btw. Weird thing though Cydia is missing now (it booted with the pineapple though!)

  30. Davey says:

    Is Cydia still there though?

  31. Tmel4198 says:

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    YOUR WELCOME!!! I SPENT SO MUCH TIME TRYING TO FIGURE THIS OUT

  32. Tmel4198 says:

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    YOUR WELCOME!!! I SPENT SO MUCH TIME TRYING TO FIGURE THIS OUT

  33. Adrian says:

    Man thank you so much I’ve been goin crazy tryin to figure this out your step by step worked perfectly again thank you

  34. Joshua says:

    Ty so very much got it to work on first try
    iphone 3gs 6.0.1

  35. skwizzle wizzle says:

    Hello,
    I’ve just downloaded ” iPhone4,1_6.0_10A403_Restore.ipsw ” and ” redsn0w_mac_0-1.9.15b3 ” to jailbreak iOS 6.0.1 on iPhone 4S just like in the video guide. When i select this IPSW, this message appears : “That IPSW is not supported by this version of redsn0w.” What’s the problem?

    Thanks

  36. Andrea Montes says:

    You are the best!!!!! I miss hope!!! I’m From Perú! I’m so glad!!!!! yeahhhhh!!!!! xoxo men!!!!

  37. Fatih says:

    Read it first, it is just for A4 devices.

    ‘Supported devices

    iPhone 4.
    iPhone 3GS.
    iPod touch 4th generation.’

  38. Mail says:

    I have the same problem to my Iphone 4 anda download iPhone3,1_6.0.1_10A523_Restore.ipsw
    and ” redsn0w_mac_0-1.9.15b3 ” to jailbreak iOS 6.0.1 . When i select this IPSW, this message appears : “That IPSW is not supported by this version of redsn0w.”

  39. SLW says:

    Hi, whenever I click jailbreak it keeps saying “exploit failed” is there anyway to fix this?

  40. alex says:

    hi which ios you use?? ios 6 3GS?? bcoz i dont know which i will use

  41. larry says:

    gracias amigo

  42. James says:

    I’m sorry, but this still doesn’t work for me! :(

  43. Calvin says:

    i’m using ipod touch 4th generation (ios 6.0.1) , but when i select the ipsw files : “That IPSW is not supported by this version of redsn0w” . using redsn0w 0.9.15b3

  44. Lokesh Shrivastava says:

    It`s working for me :)

    Did not work at first attempt, may be i missed something but when repeat the step carefully then it just worked.

  45. sophea says:

    I’m using iPhone4 . After select the ipsw files , the message show “That IPSW is not supported by this version of redsn0w” . using redsn0w 0.9.15b3

  46. John says:

    Thanks very much for this.

  47. Rob says:

    That worked for me too.
    Just restore to factory settings using itunes and then do the jailbreak.
    Back up your apps/pictures with iFunbox.

  48. vvvv says:

    Hi, Same issue… after waiting 10 min with the ‘Please wait’, it writes some more code, restarts (without the pineapple animation) and turns on… it looks like it just can’t jailbreak it (after i’m restarting the device, everything works fine without the ‘Just Boot’ initiation)… can someone help pls???

  49. rhys says:

    YEA, IVE BEEN TRYING TO DO IT FOR LIKE TEN DAYS. pls can some1 help?

  50. rhys says:

    thnx bro

  51. rhys says:

    FUCK YEA, I LOVE U

  52. panpan says:

    Same issue, iphone4 GSM 04.11.08-ICE_2_13, trying with the IOS 6.0.1 firmware (iPhone3,1_6.0.1_10A523_Restore.ipsw) and last version of Redsn0w.

    “That IPSW is not supported by this version of redsn0w”

    Cheers

  53. Almar says:

    can i ask if it is a untethered jailbreak on a iphone 3gs new bootroom or a tethered one?

  54. gee says:

    my phone seems to freeze after hitting the ‘just boot’ button. It just stays on the apple logo…Is there anyway to fix this?

  55. gee says:

    I’ve gotten that error too. Are you using the 6.0 ipsw? Because redsn0w won’t accept the 6.0.1 even though you’re jailbreaking iOS 6.0.1 so you have to use the 6.0 firmware to jailbreak.

  56. Tmel4198 says:

    your welcome, it sucks that no one could specify to me as to why it was throwing the missing key error but this is the only workaround i know of and your welcome

  57. Tmel4198 says:

    frech restore and try again, ,may i ask what iphone build your on

  58. Tmel4198 says:

    dont use the autoboot with this workaround, it will force the miussing key error again and you have to go back and select ipsw 6.0 everytime you boot

  59. Tmel4198 says:

    download 6.0 not 6.0.1, make sure itunes restores your phone to ios 6.0.1, then use redsn0w to select the 6.0 ipsw and jailbreak

  60. Tmel4198 says:

    yes must use 6.0, but it still jailbreaks your device running 6.0.1

  61. Tmel4198 says:

    6.0 ipsw you use not 6.0.1, your device will stay 6.0.1 just have to use 6.0 because thats what redsn0w is updated for

  62. Tmel4198 says:

    restore and start from scratch, i know it sucks but its the best way, also make sure you follow my steps on the missing key fix very closely and that your running redsn0w as ab administrator

  63. Tmel4198 says:

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0

  64. Noah says:

    thank you for telling me this. I have an iphone 4 and i lost my settings app so i tryed restoring in redsnow and im in a recovery loop. I am downloading 6.0.1 now. Did you have to re-activate your phone

  65. elmano says:

    Yes, as u all said, i did it now and it worked and cydia finally appear.

  66. alex says:

    oh my god why like this i got it but when i restart my fon i cannot open it again!!!!
    please help

  67. Someone says:

    So, is it still tethered jailbreak ? Or is it untethered jailbreak ?

  68. J says:

    “Just Boot” needs to be done after jailbreaking

  69. Connor Brunson says:

    someone help my 4th gen ipod touch wont go into DFU mode when i let go of the power button and keep holding the power button it just turns back on

  70. gee says:

    so if my phone is GSM should I still try to use the CDMA ipsw?

  71. jules says:

    Oddly, I’m doing everything that’s said re this missing plist and my JB isn’t working.

    I have an iPhone 4 with 6.1. I’m using the iPhone3,1_6.0_10A403_Restore.ipsw with redsn0w 0.9.15b3

    It goes through the whole jailbreaking process, I get the flood of words, then the little animation and the phone reboots…but I don’t have a Cydia icon or a pineapple!

    WTH am I doing wrong? Save me Obi-wan, you’re my only hope!

  72. Daedricprince88 says:

    I have an iPod touch 4g and after just boot Cydia never shows up someone help me plzz

  73. bobbypanda says:

    the same problem happened to me since just before clicking reboot, you must select the IPSW click APRÈSsur just reboot

    I hope it will work! :)

  74. Djair says:

    In order to do the Jailbreak for IOS 6.01 you will need to download the IOS 6.0 ipsw, not the IOS 6.01.

    I’ve bee trying to do the jailbreak since 7th of november without success. Redsn0w keep giving me the message that my ipsw is not compatible (6.01 ipsw).

    Today I try to do the jailbreak with IOS 6.0 it works…

  75. michelle says:

    I am having the exact same problem!!! i really need an answer!!!! lol

  76. michelle says:

    this is what mine is doing as well!!! No animation and the whole loading the files thing just reboots then i try the just boot teathered and i get the pinapple for like 20 minutes then it reboots again but no cydia and seemingly no jailbreak!! how do we fix this! i really need my phone jailbroken for my messages to work lol!!!

  77. michelle says:

    still tethered

  78. ihack says:

    Your a life saver than for the post I rebooted 20 times thinking I was doing something wrong

  79. gsb says:

    what to do redsnow gets stuck at uploading first stage while jailbreaking ios 6.0.1- unable to jailbreak my iphone 4 please help :/

  80. Adi says:

    thanks man ! :)))))

  81. msuth says:

    When I go extras > select IPSW it tells me to browse for my IPSW…what exactly am I looking for and where?? Cheers

  82. michelle says:

    Ok i restored and updated my iphone 4 so its running 6.0.1(10A523) firmware 04.12.02
    I need to jailbreak it so i can get my smm messages!! I’m using the iPhone3,1_6.0_10A403_Restore.ipsw with redsn0w 0.9.15b3

    It goes through the whole jailbreaking process, I get the uploading ramdisk then a flood of words, then please wait for like 10 minutes and the phone reboots (with no pineapple animation with the whole loading files!) so i still go through and do the just boot tethered which it goes through the process and i get the little pineapple for about 10 minutes and then it reboots…but I don’t have a Cydia icon and im assuming no jailbreak!!! please help what do i do i have tried this many times and have restored the phone at least 3 times as well hoping that wiping it clean would allow the jailbreak but with no success! any suggestions????

  83. sergfo says:

    Hey guys I’m having the same problem. I’ve seen the same problem posted on multiple sites, but no solution yet. I’m referring to the “please wait” for at least 5-20 minutes followed by some code and reboot but no pineapple or cydia. I also followed or tried all instructions and combinations of the following:

    -use ios6 for the proper device. Mine is iphone 4 att
    -run as admin and with win xp service pack 2 compatibility mode(or xp3 says another site)
    -tried different usb ports and restarting the computer(shouldn’t matter because I had this Jailbroken on ios6 from this computer without a problem)
    PLEASE HELP if you figured it out….

  84. sergfo says:

    figured it out! Had to use the 3.1 firmware for ios 6.0(labeled as “Global”, not AT&T). Maybe because I had it jailbroken before it was no longer recognized as AT&T? who knows. Well that was 12 hours well spent. :D

  85. tonchi says:

    hi guys… just tried and jalibreaking my iphone 3gs new bootroom, i went ok, but problem is when my phone is loading the kernel data’s i think it got stuck, with the last line saying “panic: we are hanging here…” its been 30mins and still no movement, can anyone help me please…. thanks….

  86. tonchi says:

    oh and btw i used to be on ios 4.1 then i directly started the jailbreak and didnt update to ios 6.0.1, is it ok? or that’ what made this problem? help anyone….

  87. michelle says:

    it worked!!! thanks so much!!! im gong to take your reply and post it to my question farther down!!! thanks so much!!!!

  88. michelle says:

    thanks so much to Sergfo’s response further up for the tip!! I have jailbroken my phone again!!!!! it is of course still a tethered jailbreak but hey i can message again!! lol all that was needed was to follow the directions but use the 3.1 firmware for ios 6.0 and i was using the 3.2. thanks so much for the help!

  89. Ray says:

    This is the exact same problem I have. Everything works fine, I’m pretty sure I’m doing everything as I should. My Phone also has the same setting iphone 4 running 6.0.1 with firmware 04.12.02 and I get nothing! I’m missing the Cydia app when I go through the whole process.

  90. nani says:

    hello, the same thing is happening to me right now . the ‘please wait’ did it work for you ? i been sitting here like 10 minutes now and it is still saying ‘please wait’

  91. monet says:

    Cydiaisnottheree

  92. monet says:

    Can someone PLEASE tell me why my iphone 4 6.0.1
    IS NOT DOWNLOADING CYDIA??

  93. deedee says:

    hi have problem i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,3_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow which is ? help

  94. Mauricio says:

    I had thesame problem, thanks fot the tips.

  95. neevan says:

    did any one tried on iphone 3gs :( does it work on 3gs too?

  96. jong says:

    I’m doing it all day, all night, thank you.

  97. kumar says:

    its very simple when you do justboot select ipsw and choose ios 6 ipsw and go head with justboot

  98. Gary says:

    I LOVE YOU THANKS

  99. Lana says:

    You are a freaking genius ! thank u so much ! =)

  100. jay says:

    thanks alot! great help

  101. goodluvv says:

    Every time I go to select the IPSW, it says “that IPSW is not supported by Redsnow.” What does that actually mean, and how do I correct the issue in order to jailbreak my phone? I’ve downloaded about three different IPSWs to see if I was using the correct one and they all say that same error.
    What am I doing wrong?

    Thanks.

  102. goodluvv says:

    I’m going to try this because I haven’t. Hope it works!

  103. naveen says:

    exploit failed?? on iphone 3gs 6.0.1 firmware 5.16.07 new model?

  104. naveen says:

    hey cydia crashes after jailbreak after a reboot any help ?

  105. Tim says:

    Hi, i’d just like to know if it’s pretty safe for me to jailbreak my iphone 3gs to an untethered 6.0? current baseband is 06.15.00, current ios is 4.1..

  106. Andrey Vargas says:

    only is untethered to old bootrom

  107. Ken says:

    Do you need to update ios first in itunes before jailbreaking or not? Thanks in advance.

  108. Khoi says:

    It says “Missing Keys.plist data for this build:”
    Using Ipod 4,IOS 6.0.1

  109. EPIC TY FOR THIS MAN says:

    OMG OMG OMG OMG TY TY TY TY TY TY MAN!!!!

  110. Daniel says:

    same problem :
    Missing Keys.plist data for this build:
    Device: iPhone 3GS
    ECID: 4274668825972
    Build: iPhone2,1_6.0.1_10A523

  111. asad says:

    i upgrade my iphone 3gs to ios 6.0.1 . i am trying to jail break using all the steps mentioned above .but can’t. please help me …..i m stuck

  112. linda says:

    but then i click on JUST BOOT and after it working i get_Missing keys.plist data for this build… what’s else can i do for this problem?

  113. Josinei says:

    Thanks.. that was really nice of you to share it.

    Thanks again

  114. Felipe says:

    Hola, ya hice todo, mil veces,, y corregi los problemas de las llaves, y me sale la piña, pero cuando se reinicia el cel, no sale el cydia! que hago

  115. Marcela Durães says:

    Thank You so much!! I1ve been trying to do this for so many days!!! And now I did it! Thank You!

  116. NARESH says:

    iphone4s untethered jailbreak release date..

  117. need help says:

    did it work for you? i’m having the same problem.. HELP!

  118. need help says:

    Did it work for you?

  119. rar says:

    tkx mate, i had a “missing….”problem, now is working

  120. joe says:

    thank you very much!!!!!!

  121. MICHAELh8techeythings says:

    Dude! you are awesome! tho the plugging in and selecting Ispw (needed stitch for my level jailbreak) were different in my attempts, you totally helped by providing the steps 4-10

  122. Mustafa says:

    Hey….is this an untethered jail break for ipod touch 4g???

  123. dennie says:

    befor you boot hit extra point to 6.0 and after you dit that you hit justboot

    it wil work i just dit it !!

  124. faizal says:

    thankx bro

  125. anna says:

    I did this jailbreak and everything is working but every time iphone go off I havo to do this step just boot and then it works. is there any help?

  126. eren says:

    i have stuck on limera1n exploiting can someone help im getting insane cause of the issues

  127. Justin says:

    After I click Just Boot, it stays at a screen saying Waiting For Boot. It just sits there and doesn’t do anything. I can’t seen to get it to work. Please help.

  128. pomsy says:

    i dint get u…wat do u mean by hit hit extra point to 6.0

  129. Connor R says:

    Hey guys can anyone PLEEEAAASE tell me why i have to click Just Boot Everytime i turn off my ipod i dont want to plug my ipod into my computer and do this whenever my ipod dies. It would make my life A LOT easier.

  130. Gucci Mane says:

    This is a tethered jailbreak, which means you need the assistance of your computer to successfully reboot your iDevice.

  131. Gama bagjalaksana says:

    i cant install, redsnow says ” unsupported ipsw ” what must i do?

  132. Jeevs says:

    I had 3Gs jailbroken with iOS 4.1, which was working fine. Tried upgrade to iOS 6.0.1 by:

    1. Restore to ‘iPhone2,1_6.0.1_10A523_Restore’ using iTune 10.7
    2. Choosing the ‘iPhone2,1_6.0_10A403_Restore’ IPSW, jailbreak using ‘redsn0w_win_0.9.15b3′.
    3. Again using ‘iPhone2,1_6.0_10A403_Restore’ did just boot tethered.
    4. Cydia shows 6.0.1

    No error with above steps, but didn’t get service.

    Then based on the suggestion, I tired:

    5. Installed Ultrasn0w Fixer.

    Still no luck, then tried:

    6. Jailbreak again to Downgrade to iPad Baseband.
    7. Using ‘iPhone2,1_6.0_10A403_Restore’ did just boot tethered.
    8. Re-install Ultrasn0w Fixer.

    Same.. No service still..

    Please help

    -Jeevs

  133. Siss says:

    PLEASE HELP

    i cant install, redsnow says ” unsupported ipsw ” what must i do?

  134. Slash says:

    Hi, I am using the brand new iPod Touch 4G and try to jail break the device. When I am rebooting, the system shows:

    “Missing Keys.plist data for this build”
    Device: iPod Touch 4G
    ECID: XXXXXXXXXXXXXXXXXXXXXXXXXXXX
    Build: iPod4,1_6.0.1_10A523

    I download the firmware iPod4,1_6.0_10A403 from here and I am sure I am using the 6.0 in stead of 6.0.1 to jail break.

    I cannot reboot that means I cannot use it. Can you help me to solve the problem? Thanks in advance!

  135. Slash says:

    Oh, I find the solution! It’s alright now!

  136. Rq Bukhari says:

    Can you help me please am also having the same problem keys.plist missing.
    Thanks

  137. MailYarrum says:

    Yeah can you help me also, I had that problem previously, changed the 6.01 back to 6.0 and now Im only receiving “Missing Keys.plist data for this build”

  138. anna says:

    u should install ulreasnow and ulatrasnow fixer and there is order, think first fixer then ultrasnow

  139. Syed says:

    Hey Guyz I have done the above procedure for my iPhone 3gs.. I have done successfully. But still I have the previous version…. please help

  140. ramanjeet says:

    hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, plz help me to get out of it.

  141. ramanjeet says:

    hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me to get out of it.

  142. Tmel4198 says:

    Ramanjeet* This has happened to me a couple times and if you just put it back into dfu mode and try the process over again it should work. And try holding the home button longer than usual. It works for me. Fresh restore and jailbreak will also fix

  143. Tmel4198 says:

    you have to use firmware 6.0 dude not the 6.0.1! 6.0.1 is already on your iphone you must be fully updated and download the 6.0 firmware for the jailbreak to work, it still keeps the 6.0.1 on your phone

  144. Tmel4198 says:

    dont read my first comment that ment to go to the other thread where you asked about stuck apple logo

  145. Tmel4198 says:

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0!

  146. Tmel4198 says:

    you have to use the 6.0 firmware to jailbreak 6.0.1

  147. allahjan says:

    hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me to get out of it.

  148. hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me

  149. ramanjeet says:

    thanx dude

  150. goldxhero says:

    hello can we jailbreak A5 devices or not or is there at least a tethered jailbreak coming our for A5 devices can i jailbreak A5 devices tethered or untethered

  151. goldxhero says:

    hello can i jalbreak this version 6.0.1 (10A523) can i ajilbreak this

  152. goldxhero says:

    on my ipod touch 4th gen

  153. goldxhero says:

    hello i did it i put it in dfu mode after that when i opened redsn0w it just opened as it was being identified and the keys were missing

  154. Agung says:

    Hi …

    I’m using iPhone 4 CDMA, I’m satisfied with this tutorial. Jailbreak = success. Thanks:)

  155. Jeevs says:

    Hi Anna,

    I tried that and for a moment I got the service but then went to ‘No Service’ mode again..

    Please help..

  156. Steve says:

    hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3
    and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message:
    This ipsw is not supported by this version of redsnow!!
    Fingerprints xxxxx.xx.xx.x.xxx

    Please help me!!!

  157. alex says:

    man, u need to download the 6.0_10A403 to jailbrake the 6.0.1:)

  158. Joshua says:

    I have an iPhone 4 with 6.0.1 i just used RedSn0w 0.9.15b3 and iPhone3,1_6.0_10A403_Restore file. It seemed like the Jailbreak all went well. I saw the Pineapple and “installing bundles” message complete then said rebooting. When the iphone 4 rebooted. i dont have Cydia… What went wrong… or did i miss a step.. please and thanks.

  159. jester-plot says:

    You just did an tethered jailbreak, that’s mean that every time you turn off your iphone or the battery drain out you have to open redsnow>extras>just boot to recover your cydia, that’s the meaning of Tethered. We’re expecting the untethered release to avoid this.

  160. prabhu says:

    Hi. i’m trying to jailbreak my ipod touch 4g with ios 6.0.
    well it was started perfect but in the jailbreaking (matrix mode) the screen was stopped with the last code line as
    ” Bug in libxpc: Could not set context on Mach port! ”

    please help me how could i jailbreak it

  161. Frustrated says:

    To follow your instructions step by step has no worth. How can you find the IPSW files? It is not included in this “step by step” instruction. There are no straight forward answer to find here. In the video you also find it after pressing “Select IPSW”. But where are these files and where can I find them? The only thing happening is that the program let me to choose where the location of the files are… but where are they? This means I am stuck and can not go further. Please include this IPSW step in your guide if you want to make it “step by step”.

  162. grant says:

    Everything works until get to just boot! Then it has missing keys and etc. Just the boot part i have a problem with.

  163. Patrick25 says:

    Noobs should not do any jailbraking because they always ask stupid questions like ( why do i have to plug in my device every time my device dies?) look at the the instructions and read it all befor you do anything that you might regret and have an expencive paper weight

  164. Joker says:

    I am having a similar problem with Cydia not showing up post “Just boot”
    Iphone 4 6.0
    Followed process to jailbreak from 6.0 to 6.01
    ReEntered DMU and selected IOS 6.0 to bypass playlist error.
    Selected “Just Boot”
    Iphone restarts but there is no sign of Cydia.
    Any tips would be great.

  165. Thipax says:

    Thank you

  166. ditto says:

    Hi. i jail broke my iPhone but then when i try and reboot. It says missing key.plist or something like that. Does anyone know what the problem might be?

    Regards
    Help is much appreciated

  167. Angie says:

    I connect my iphone 3gs and follow the steps to extra and then I select IPSW and no firmware files shows up. What I’m I doing wrong?

  168. wilber says:

    Heey guys please help. My phone is restarting it self constantly.

    I’ve jailbroken my iPhone 4 a couple times but this time something went awfully wrong. I jail broke my phone exactly like in the descriptions with redsnow and the iOS 6.0 ipws and I saw the pineapple and rebooted……the whole procedure….well, now I still don’t have cydia on my phone and it is restarting itself on and on and on and on again. and that makes it even impossible to set it back with iTunes.
    please help, pleeaase

  169. Blu says:

    Tell me what you did in order to jailbreak it. Be really detailed.

  170. Marshall says:

    I done everything but fail. I did’t get pineapple moving application please help

  171. Harry says:

    I can’t use redsnow 0.9.15b3 in iPod4,1_6.0.1_10A523_Restore, redsnow said “ipsw not supprted”. So I jailbreak with snowbreeze 2.9.7 and everything working flawlessly.

  172. Bryan Wright says:

    The “Just Boot” will finish and the pineapple will show on my screen, but once that disappears, the Apple comes up and doesn’t finish rebooting. Any tips on what to do?

  173. draya says:

    Thank you so much great instructions!

  174. Tmel4198 says:

    1st. unplug iphone and Hard reset it by holding lock/power button and home button at the same time for 10 seconds or until you see the screen shut off!

    2nd. without turning it back on, enter DFU mode without the phone plugged in! which is:

    * 3 second power button!

    * 10 seconds home and power button (once you see the screen power off you know you have 3.5 seconds left)!

    * 15 seconds just home button!

    3rd. Open redsn0w and click just boot
    4th. Now plug phone in and it will auto start the Just Boot process!

    If this does not work it means the jailbreak failed and your phone is in a sort of mobile substrate/crashed phase so you must restore and start over :/

  175. Tmel4198 says:

    thats because you use the 6.0 IPSW and not the 6.0.1 which is explained in the instructions!

  176. Tmel4198 says:

    6.0.1 jailbreak requires the 6.0 IPSW because redsn0w doesnt support 6.0.1 yet but it still keeps your phone on 6.0.1

  177. Tmel4198 says:

    please be more specific

  178. Tmel4198 says:

    Hello, this worked for me because i have been in the same situation before.

    1st. you have to hard reset your iPhone by holing the power and home button for 10 seconds, but because the reboot state your phone is in you must hold for an additional 5 seconds so it will shut off twice.

    2nd. Once it is fully off and not turning on by itself. hit the power button and do another 10 second power and home button hard reset but once it turns off let go of the power button and keep holding the home button to put the iPhone into recovery mode, you will see>(iTunes symbol with the cable)

    3rd. Restore your iPhone using iTunes

    4th. Start from scratch and begin the jailbreak process over again but be careful to follow ever step precisely

  179. Tmel4198 says:

    you have to find where you downloaded the firmware….

  180. Tmel4198 says:

    my instructions about missing keys.plist fix works great. it is posted on this website but i cannot link it in this comment for some reason! go to the home page and look on the right side where it says Absinthe Jailbreak Forum, it is the second post,

    cheers

  181. Tmel4198 says:

    haha i totally agree i am always helping everyone on this website but get nothing in return which sucks, i guess i am just a nice guy! it is not hard at all to figure the stuff out your self. you know?

    does anyone use google anymore or youtube?

  182. Jose says:

    HELP PLEASE!!! I tried to follow all the steps but when it (iPhone 4 GSM iOS 6.0.1) goes into matrix mode, it gets stuck on please wait… and it just keeps doing that all the way down until it eventually restarts by itself.

  183. Tmel4198 says:

    the only fix is a restore and rejailbreak

  184. advocatus says:

    Hi. I have exactly the same problem. My windows 7 “offers” only to find IPSW files somwhere in my comp. But I have no idea where to find them. On all the videos and instructions both IPSW files are automatically offered for choosing, but this doesn´t work on my comp.

  185. Tmel4198 says:

    you download the 6.0 IPSW from this website for your specific iDevice. the 6.0 IPSW is used to jailbreak 6.0.1

    do not download 6.0.1 IPSW

    redsn0w doesnt support 6.0.1 yet so you use the 6.0 IPSW to jailbreak. Your phone will still be on iOS 6.0.1

  186. Tmel4198 says:

    did you even jailbreak hahaha

  187. vijay says:

    hi guys is this also jailbreaks i phone 4S ? thanks

  188. Tmel4198 says:

    Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G

    no 4S, its only for A4 chip devices

  189. Tmel4198 says:

    *Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G*

    iPhone 4S has an A5 chip, this jailbreak is only for A4 chip devices

  190. Marcus says:

    its did’t work on me too :( any solution . please wait too long

  191. MustardChef says:

    Thanks SO MUCH. My iPod has gone from 5.1 tethered to a missing keys.plist of that version. To having to restore it and finally its fixed again!

  192. advocatus says:

    6.0 IPSW = IOS 6 firmware? If I uderstand it correctly I should “downgrade” my new Ipad (already IOS 6.0.1 installed) to IOS 6 and then redsnOw works? Is there any risk to damage Ipad by downgrading? thanks a lot

  193. tom says:

    Hi,

    I’m trying to jailbreak my unlocked iPhone 4 running 6.0.1 firmware. I have the 6.0 firmware selected in extras, the iPhone is in DFU mode, I start the Jailbreak and it gets past the limera1n stage and to the upload stage and then stops and says Exploit failed, am I missing something? I’ve tried all possible types of firmware so I know it cannot be that. Thanks in advance

  194. Tmel4198 says:

    Exploit failed happens because you didnt follow step 3 of DFU mode correctly, you hold the home button even when the screen changes till you see “uploading first stage”…its 15 seconds, dont let go when it beggins jailbreaking at 8 seconds

  195. Tmel4198 says:

    restore and rejailbreak

  196. Tmel4198 says:

    is that a serious question? that is what this thread is about, jailbreaking 6.0.1 with the 6.0 IPSW

  197. Tmel4198 says:

    ITS THE 6.0 IPSW, not 6.0.1, your phone needs to be on 6.0.1 and you use the 6.0 ipsw to jailbreak 6.0.1.

    why? because redsn0w doesnt support 6.0.1 yet

  198. tom says:

    I’ve tried putting the iPhone into DFU mode at all different stages of the process, before I run Redsnow, the initial screen of redsnow, just before I click the Jailbreak icon, after I click the Jailbreak icon etc. Yet I still get the same result. Ive restored the iPhone to a fresh 6.0.1 firmware and tried all of the above, to get the same result. Any help is much appreciated

  199. kilic says:

    ios 6.0.1

  200. kilic says:

    cancel reply

  201. Malik says:

    Hello there
    I am having Iphone 3GS and i upgraded to IOS 6.0.1 (Tethered). The phone and IOS is working fine but sometimes i loses signals even for hours and that happens mostly in the day from 8 am till 3 PM. Whereas in the evening or night, the signals are back, however sometimes also get interrupted in between. My Baseband is 6.15.00. Can anyone please advice me as i am in great frustration thus losing my signals at work all day long.

    P.S this problem was also encountered in IOS 5.1.1

  202. Vecco says:

    I need JB for iOS 6 to my iPad 2 wifi. when will it be released?

  203. nikul says:

    I used 6.0.1. ipsw files bus i got it same problem.
    pls give me a perfect Solutions.

  204. Yoshi695fr says:

    You are the f.king boss! Tmel4198 I’m in france, Iphone 4 is working! You need to make your website and scribe the REAL SOLUTION!! You’re the boss! <3 <3 Iphone4 is hard to jailbreak.

  205. Tmel4198 says:

    1.use a different USB port on your computer.
    2.make sure you have latest redsn0w.
    3.use USB 2.0 drive and not 3.0, make sure your USB drivers are updated.
    4.when following the last step of the DFU process you must keep holding the home button down even when the screen changes.
    5.keep holding the home button until you see “uploading first stage” or “uploading second stage” during the jailbreak process

  206. Tmel4198 says:

    Their isnt specific release days

  207. Tmel4198 says:

    you have a 3GS, those phones are old and out of date. signal has nothing to do with software. it is most likely a hardware problem

  208. Tmel4198 says:

    thank you :]

  209. Tmel4198 says:

    yes i do lol

  210. Tmel4198 says:

    did you not read my comment right above yours? you use the 6.0 IPSW it says it right in the instructions!

    DOWNLOAD THE 6.0 IPSW not the 6.0.1 IPSW

    your phone will stay on 6.0.1, it just needs the 6.0 to jailbreak it

  211. Tmel4198 says:

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0!!!!!!

  212. Tmel4198 says:

    lol i love how no one pays attention to that

  213. Tmel4198 says:

    You have to select the 6.0 IPSW by going to redsn0w>extras>Select IPSW

    Then go back and “Just Boot”

    you must do this everytime you reboot your phone because it is a tethered jailbreak

  214. Tmel4198 says:

    restore and update your ipod touch 4g to 6.0.1 then use my instructions to jailbreak it.

    For everyone with the MISSING KEYS.PLIST ERROR
    1. Exit redsn0w and turn off your phone and unplug it
    2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
    3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
    4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
    5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
    6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
    7. In redsn0w go to extras>>select IPSW (6.0).
    8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!

    Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0…

  215. Tmel4198 says:

    what? you need to be on 6.0.1 to jailbreak it…you just use the 6.0 IPSW and not the 6.0.1, but your iDevice will stay on 6.0.1

    this is not for ipads anyways read the title

  216. Manu says:

    hello, i’ve done all the stepts ypu’ve said, but I don’t still have cydia!! i don’t know what to do more…i’ve tried all :S

  217. Malik says:

    Well the signals were working fine a month back. and neither i dropped set nor tempered with it. So there doesn’t seem any hardware issue. and if there was any, the signals would’ve gone permanently, not for short period of time.

  218. Tmel4198 says:

    what iPhone do you have

  219. Lauren Reeves says:

    i’m trying to change my software to 6.0 to jailbreak as i have 6.0.1 but it isnt working? someone please help? ive downloaded it and done it via itunes but when i click on it nothing happens, and it just opens itunes but nothing more? PLEASE HELP! thankyou :-)

  220. ryan says:

    Hi I had this problem also, any suggestions on where to find this?

  221. Kamps says:

    Its tethered at the moment.

  222. james says:

    the IPSW is not supported by this version of redsnow.

  223. “Then Select IPSW button , and choose your iOS 6.0 firmware for your device.”

    Work for me

  224. Chrissy says:

    How long is the reboot suppose to take? Ive been waiting hours.

  225. mhedjie says:

    Do I need baseband preservation before doing this jailbreak? Thanks!

  226. AlexPozn says:

    I chose iOS 6.0 firmware for my device, when dowloaded it… and redsnow says the same…

  227. matt says:

    you rule! thx

  228. harry says:

    You’ve to downgrade to 5.1.1 and then you don’t have to do that! than you ‘ve a untethered jailbreak

  229. kiran says:

    I’ve done it but there is no cydia, apps store and some other icons. Now there is battery percent in my ipod 4…How to get appstore now in my ipod…????

  230. Brittany says:

    Hi,
    not exactly sure whats going on with my phone, it’s my first time jailbreaking anything. But i’ve done everything step by step, downloaded redsn0w, got the firmware for ios 6..everything takes but whenever i’m the the matrix mode it starts working perfectly for a minute, then i get a LOOONG row of please waits..stays on my screen for forever, no pineapple guy nothing..it just booted right back to my lock screen. I’ve restored my phone, tried to read forums on EVERYTHING. And i STILL cannot find what the problem is! PLEASE HELP ME! I have a Iphone 4..hopefully SOMEONE can help me, i’ve been messing around with this crap for almost 2 days, it’s getting tiring! Thanks so much :)

  231. playerSC says:

    Hi I have problem. I every times stuck at Please wait… in matrix mode. Any solution ? I restore my iphone twice but i still stuck there… :(

  232. marwan says:

    i have an iphone 3gs and i have ios 6.0.1 and i followed the steps exactly and every thing is supposed to be done perfectly and redsnow says done and the iphone started well BUT i cant find cydia in the phone …please tell me where did it go wrong …..
    ps: i used in the redsnow the ios 6.0 as said in the instructions

  233. marwan says:

    i have the same problem i have 3gs iphone …please help

  234. marwan says:

    thanks guys your comments where very helpful and i found my problem and the solution …. thanks for being very helpful and wish you all a very succesful career … you have done an outstanding job .. keep it up :D :D

  235. soknang says:

    It looks you restore using stock firmware of iOS6.0, please try to preserve base-band (custom firmware) before restoring it.

  236. Jan says:

    Hi Marwan
    It looks like I have exactly the same issue as you had, but I was not able to fix it yet. The only hint I find everywhere is booting up using the “Just Boot” function, but that doesn’t fix it for me.
    Could you maybe share how you were able to fix the problem?
    Thanks
    jan

  237. digi says:

    Thanks it worked dude!!

  238. digi says:

    no dude… sorry it didnot work… according to redsnow it did.. but there’s no cydia icon on my ipod!

  239. TT says:

    I’ve sucessfully jailbreak and Just Boot process. But when my Iphone 4 boot up with the Pineapple logo then show up the Apple Logo and stuck there, what’s happen? please help.

  240. john says:

    what horrible engrish you have

  241. redmike says:

    Hi! I followed everything but I can’t find the Cydia on the homescreen.

    I think I installed it correctly because I have the same screenshot shown on your tutorial and everything goes well until the last part. Where can I find the cydia?

    Thanks!

  242. Jan says:

    A full restore fixed it for me – before this I just updated an already jailbroken iOS 5 to iOS 6, which didn’t seem to work.
    Now the untethered Jailbreak on my 3GS with old bootrom is running fine :)

  243. Jan says:

    Hi

    If you have any other device than a 3GS with old bootrom: Download redsn0w 0.9.15b1 (not b3) and start your phone using the “Just Boot” option found under extras.

    If Cydia still doesn’t show up or you are on a 3GS old bootrom, you probably upgraded from an already jailbroken iOS 5 with Cydia on there. Try a full restore, that should fix it.

    Cheers
    Jan

  244. mzkitti2u says:

    have you turned disabled 3g? i had the same problem with my 3gs and once i disabled the 3g function i have service!!

  245. mzkitti2u says:

    EDIT
    “HAVE YOU DISABLED 3G”

  246. Manuba says:

    Y esto es seguro??puede pasar alguna desgracia

  247. Sabs says:

    I’m having the exact same problem. I’ve restored iOS 6.0.1 about 10 times and tried to jailbreak over and over again but it keeps getting stuck at the ‘please wait…’ screen. Anyone have any ideas?!

    Thanks,

    Sabs

  248. Sabs says:

    I can’t seem to get past the ‘please wait…’ screen. I’ve restored iOS 6.0.1 about 10 times and tried to jailbreak over and over again but it never loads past that. Anyone have any ideas?!

    Thanks,

    Sabs

  249. kev says:

    iphone 4 on ios 6.0.1 opened redsnow entered dfu mode selected 6.0 then jailbreak then select extras reboot get pineappl logo but no cydia, can anyone help!

  250. Darsh says:

    I have tried doing this jailbreaking several times. Every time after matrix page, after putting my phone in DFU mode, and going to extra boot thing, redsnow stucks at saying waiting for reboot and thats it nothing happens !!!!!!!!! Need Help !!!!!!!!!!

  251. RKisbEst says:

    thx alot :P

  252. Brandun says:

    Same here

  253. randallr85 says:

    get the pineapple, then no cydia. says everything works fine but when i do the “Just Boot” option, it says waiting on reboot and wont move on.

  254. nickey says:

    My iphone 3gs used to be jailbroken but I accidentally updated on itunes for 6.0.1 so it started all over. I tried a different jailbreak so everytime my phone turns all, all it shows on the screen is the connection cable and itunes (signaling to plug into itunes). This works but then on when it goes to the iphone it says error please reboot in normal mode.

    I can’t do that because my iphone isn’t in normal mode. And I have t-mobile but don’t have the simcard yet.

  255. kev says:

    btw i dont see moving applications after jailbreak process, can anyone help please, i have jailbroken my own device on 6.0 but cant jailbreak my mates with 6.01…

  256. harsh says:

    when i try doing jailbreak…select ipsw..it says that ipsw is not supported by current version of redsnow…can any one please help me…

  257. Rob1 says:

    hey buddya hi
    right now im going to make a jailbreak tehtered to my iphone 4 ios 6.0.1 .
    but mi questions its about the unlock way.
    so with the jailbreak ready on my device which its the way to make a unlock them .
    please for your attention will be aprettite

    thx you guys

  258. daniel says:

    what is mising keys plist data for this build:
    device:iphone4
    ecid:4336457799031

  259. Alexander says:

    I’m going to make jailbreak my iPad 3, I have iOS 6.0.0, When I select ipsw 6.0.0 redsnow says, that this version ipsw Is not supported… Please can anybody help me? What I’m doing wrong… Waiting for your comments, thanks.

  260. nozehj says:

    Hi. I am noob to iphone stuff. Is it possible to jailbreak and then unlock an iphone that is not yet reactivated? My iphone was previously jailbroken and unlocked and I accidentally restored my iphone 3gs to ios 6. And now i’m stuck on the sim activation settings and can’t seem to get through it because i don’t have the sim. Please i really need your help. Thank you in advance!

  261. vonJonssing says:

    Same here… just getting an error and says i got to reboot to normal mode and do a “slide to power of”. Then try redsnow again…

  262. andrew says:

    wtf!!! none of your info works especially that video followed step by step and it says build error..

  263. andrew says:

    not impressed with the waiting on the reboot either ….

  264. quicky says:

    no untethered jailbreak for iphone 4 for ios 6 since months? I don’t think there will be any jailbreak anymore, it’s just going too long.

  265. vonJonssing says:

    So. i managed to get jailbraking part to work. Restored the phone to fabric. But now theres a new problem. When im started the just boot part, and redsnow is done and the pineapplelogo shows up, its supposed to start from there? and not get the appleloga between? quz im getting the applelogo and its like frezes there… to get the phone working again i need to do a reboot. and then im back to the beginning again…
    have tried 6 times now i think, but i dont manage to get it working properly :(

  266. jhon says:

    hey man first open redsnow(latest version) then select extras and tap “select ipsw” then select the ipsw that you download in this page and thenn click in ok

    then just jailbreak and when the jailbreak is over your device will be on

    but is no over you will not see cydia if you dont reboot your device

    to reboot close redsnow then re-open it and click in extras and click in select ipsw

    now when you select the ipsw just click in just boot and follow all directions in the screen and if the jailbreak is correct yo will see the pineapple

    i have an ipod touch 4th with ios 6.0.1 jailbroken with this page lml

    p.d: all users when you jailbreak your device you will not see cydia

    so, follow the direction in this page but when its time to reboot your device REMEMBER to click in “select ipsw” then click in “just boot”

  267. Claire says:

    Ugh!
    I get to the select IPSW but the selection doesn’t show. I can’t select ios 6 because that isn’t even an option. It just show things like my documents and pictures.

  268. austinDean says:

    Use red snow and click extras> recovery fix. That will get rid of the recovery loop and freeze.

  269. austinDean says:

    Go to iTunes. Hold Alt/Option down on the keyboard and click Uodate. Select the desired iOS and then Open. Click update on the pop-up box and iTunes will verify and update ur device, jumping you past the activation screen.

  270. Matt says:

    I have the pineapple on my screen but won’t do anything. Now what? How long should the boot take the first time?

  271. dude says:

    plz help I am on ios 6.0.1 on my ipodtouch 4g and I tried both ios 6 and ios 6.0.1 and neither show anything like it in the tutorial just 3 folders named dfu,urs,and local PLZ HELP ASAP!!!

  272. Devan says:

    Did the whole process, downloaded redsn0w 0.9.15b3, got the firmware (iphone3,3 6.0, used it for the jail break, got all the way through the process untill it was time to “Just BooT”! clicked on just boot, waited for the pinapple, and it froze and said “Missing Keys, plist data for this build!?? Whats up??

  273. Ben says:

    It says the jail break is for IOS 6.0.1, I downloaded the correct IPSW file for an Iphone4 with Ios 6.0.1 but then redsnow says:
    That IPSW is not supported by this version of redsn0w.

    Why?!

  274. Ben says:

    Same thing happened to me. I think it’s because we used the IPSW for 6.0 and not the one for 6.0.1.

  275. Ben says:

    Seriously! What the fuck am I supposed to do. I just updated to 6.0.1 and I can’t downgrade and the fucking jailbreak doesn’t work. Fucking bullshit

  276. Shahid says:

    When Iphone 4s ios 6.0.1 is coming?we are waiting….plz help me z

  277. Shahid says:

    sorry I mean Jailbrek for iphone 4s 6.0.1 jailbrek

  278. Monju says:

    when iphone 4s ios 6.0.1 jailbreak is Coming.plz help me plz

  279. Courtney says:

    For anyone having issues with the “Missing Keys.plist data for this build:” error or if you are getting stuck at an image of nothing but a pineapple, then it is because you are using the incorrect IPSW build files for your iPhone 4 and you have to keep in mind that there are 4 different builds which are iPhone4,1 – iPhone3,1 – iPhone3,2 and iPhone3,3. The “iPhone3,1 – iPhone3,2 and iPhone3,3″ builds are still for the iPhone 4, so don’t let the build numbers fool you.

    If you are receiving the “Missing Keys.plist data for this build:” error message or if you are getting stuck at an image of nothing but a pineapple, then this is because you are using the incorrect build for your phone. All you need to do is to download and install the correct build and then you will be good to go.

    If this isn’t the fix for your problem, then I do not know what to tell you, looks like you’re screwed for now.

  280. Courtney says:

    Also, for those that are still confused, this IS the jailbreak for the iPhone 4s, GSM, Global and CDMA….however you WILL NOT and CANNOT use the “iOS 6.0.1″ build to jailbreak the iOS 6.0.1. You MUST use the iOS 6.0 build for the jailbreak, otherwise you are just wasting your time and not paying attention to detail :-)

  281. Courtney says:

    You are not selecting the right build.

  282. Anibal rodriguez says:

    All goes well until the part of downloading jailbreak because it will give the white letters and black out there please wait an amount of time and does nothing

  283. Courtney says:

    You are using the wrong iPhone build. If you are getting stuck on the “Please wait….” that takes up the screen from top to bottom then this is because the script is timing out because it is looking for information that is not compatible with the build you have selected. I would suggest downloading ALL of the builds (there are only 4) and then attempt to install them one by one until you find the right build.

    My iPhone’s model number tells me that it is a GMS, however the GMS build did not work. I had to use the “Global” build and that worked perfectly.

  284. Courtney says:

    If the “jailbreak” part of the method is working but you get the frozen apple logo after you see the pineapple logo, then this is because you are using the wrong build. Almost all of the issues I am seeing here on this post are due to not using the correct build. Please see my comments below for 12/12/12.

  285. barneyfckinstinson says:

    how did u manage to work it? cause i got the same problem… PLEASE WAIT for hours… its not working! im on iphone 4, i selected manually the 6.O ipsw, click jailbreak, and after when its going to install on my phone, the PLEASE WAIT thing appears again and again and again!

  286. Ron says:

    Get all the wat to the part were you just reboot and ther get missing keys plist stuff, but I am using the correct build. The entire process worked until then which would hace been step 9

  287. Just some hippie dude says:

    Alright. So i have an AT&t Iphone 4 on 6.1. I downloaded the “Download iOS 6 iPhone 4 (AT&T)” and everything seemed okay until i got to the “please wait” screen with white letters, black background. It Would take 10 minutes for it to do anything then reboot with apple logo. Download the Global version instead of the AT&T ios version. Hoped this helped someone.

  288. Lag0 says:

    You need to use the 6.0 IPSW. Its essentially the same firmware, with just minor bugfixes, so it works to jailbreak iOS 6.0.1. I just did it last night on my CDMA Iphone4 on 6.0.1

  289. Hardik says:

    i have apple 4g and i jailbreak but my phone was restart & restart,what was the problem…. Waiting for your comments, thanks.

  290. mamoon says:

    hey Courtney .. dude how are yoy
    tell me one thing clear that above procedure of jailbreaking is rite for iphone 4 ios 6.0.1 and firmware 4.12.2
    may i use this iPhone3,1_6.0.1_10A523_Restore.ipsw for jailbreak

    thanks waitin for your reply

  291. jojo says:

    not impressed with the waiting on the reboot either ….

  292. Jack says:

    No offense, but you need to grow up. Asking for girls ages online is a little bit perverted. Go and find a girl in real life.

  293. Klein says:

    Yeah I tried the 6.0.1 ipsw and that didn’t work then i see in support that someone says to use the 6.0 one – which one is it folks? you have it posted both ways and neither seems to work. I’ve tried both and neither work. “Missing plist on the 6.0″ one.

  294. klein says:

    If that were true then why am i getting a missing plist when i try to use the 6.0 and then when i try to use the 6.0.1 it says not supported with this version of pineapplewhateverthisis? why even post links to the ipsw’s that don’t work????

  295. klein says:

    Um yeah that doesn’t work. Tried both the global build (which was recommended here by a couple people who said the normal at&t one didn’t work). Both the global and at&t one are both giving me the missing plist crap. Ideas?

  296. kardandon says:

    ir doesn’t see 6.0.1 ipsw for ipod 4 on redsn0w

  297. Brandon says:

    I can’t seem to find step 5 where I have to locate the firmware. it shows nothing in my files. Someone please help

  298. Mike213546 says:

    plz someone reply to me if it is working or not cause i dont wanna risk it…

  299. Iree says:

    If it says Please Wait… Then you have downloaded the wrong ipsw.

    If you tried iPhone3,2_6.0_10a403_Restor.ipsw and it says please wait. Try iPhone3,1_6.0_10a4_Restore.ipsw and it should work.

  300. Israel says:

    Hi all,
    so all went well and your comments here are great help and only by reading the steps and your comments i got pass the “no keys” and other problems. no i got the pineapple small sign and it turned to the regular white apple sign… and that it.. nothing beyond that… how long dose it take?

    thanks :)

  301. hammad says:

    if i have ios 6.0.1 on my ipod then do i still download the ios 6.0 firmware as they r saying above (for jailbreaking ios 6.0.1) ?
    anybbody know?
    bcuz they r saying download ios 6.0 in the pic and etc (to jailbreak the ios 6.0.1?)

  302. Mike213546 says:

    it usually takes about… i dun know… 10-15 minutes for me (i updated my ipod after that so yea i have to do it again)

  303. Israel says:

    Hi Mike,
    another Q – for some reason i get when downloading iphone4 ios 6.0 a version of iphone3,1 6.0 y? when i found a iphone4 version it is not supported by redsn0w… can you help me out here? just looked and sew the jailbreak is incompleet….

  304. hammad says:

    im trying to jailbreak my ipod 4g ios 6.0.1 since two days
    the missing keys .plist data for this build keeps coming up again and again and im pretty sure im doing everything right so now watt? :o

  305. Mike213546 says:

    Hello Israel,

    I think they have accidentally put the iPhone 3 in the iPhone 4 section.
    Have you got iPhone 4S? Just checking because that is 4,1 6.0 10A403

  306. Miles says:

    Letting us know thta we need to use a web-browser that will NOT convert the .ipsw file into .zip like Internet Explorer does would be a GOOD F&*%ING THING TO TELL US AT THE BEGINNING OF THE ****WORST MADE JAILBREAK TUTORIAL (as well as troubleshooting responses)***!!!!!!!!

  307. JION says:

    the pineapple doesn’t apear in my ipod touch 4g! i did everything the video sad.

  308. bens says:

    i did past all the step but there is no cydia icon after jailbreak. iphone 4.

  309. Brittany says:

    I went through all of the steps, loaded redsnow, the frimware needed. Everything went fine. Unfortunately, cydia did not show up on my home screen. I checked the box next to cydia when I loaded redsnow. I rebooted once it installed. Im not sure what to do. I have repeated all of the steps over and over and it never shows up on my screen. HELP!!!

  310. Alexander says:

    That is my build – iOS 6 for iPad 3 (The new iPad) – Wifi+3G(GSM)
    But like i said, when i select it, redsnow says that it is not supported…
    I have iPad 3…with 3g …what build i need?…
    Thx for your comments :)

  311. Cristy says:

    I bought used ipod touch, think is 4 gen (has facetime) reset & upgraded to ios 6.0.1 both accidentally, was jailbroken and didn’t know … I start to jailbreak, downloaded Redsn0w & the Ipsw, applied it and when I try to enter DFU mode (followed instructions & even tried different timings and whatever ), it won’t enter or recognize dfu mode. Even downloaded the app to enter DFU mode without pressing Ipod buttons ! HELP!

  312. Cristy says:

    Somebody help me please!!! I bought used ipod touch, think is 4 gen (has facetime) reset & upgraded to ios 6.0.1 both accidentally, was jailbroken and didn’t know … I start to jailbreak, downloaded Redsn0w & the Ipsw, applied it and when I try to enter DFU mode (followed instructions & even tried different timings and whatever ), it won’t enter or recognize dfu mode. Even downloaded the app to enter DFU mode without pressing Ipod buttons ! HELP!

  313. syed07 says:

    i had the same problem when i tried to jail break using redsnow… the solution is to use snowbreeze-v2.9.7
    to jail break instead of red snow and its easy to jail break using snowbreeze than redsnow…. hope your problem is solved!!!

  314. ElTuyo says:

    Hello all,
    I have an Iphone 4 with iOS 6.0.1 and BB 4.12.02.
    I have used RedSnow 0.9.15b3 and went to Extras, selected the following ipsw:
    iPhone3,2_6.0_10A403_Restore 10-30-47.ipsw

    I end stuck with my iphone sayin “please wait” in the black background. I’ve read here I should use another ipsw, so I downloaded all these ones:
    iPhone3,1_6.0_10A403_Restore.ipsw
    iPhone3,1_6.0.1_10A523_Restore.ipsw
    iPhone3,2_6.0_10A403_Restore.ipsw

    The problem is that it doesn’t work with any of them, RedSnow says sth like non-compatible with that ipsw…So that’s where I’m stuck now.

    I use it through a Mac, so I cannot use snowbreeze.

    Does anyone know if there’s any solution or maybe any step I might be taking for granted (i dont know, I followed the instructions several times…)

    Thanks in advance

  315. JAZZPAULINO says:

    Can someone tell me how to jailbreak iphone 4 ios 6.0.1 wth the home button not working?Thanks in advance.

  316. ralph says:

    Get the same here, *not supported by this version of redsn0w…

  317. Jason says:

    Why’re you using the iphone 3 ipsw? Use the iphone 4 since you have an iphone 4.

  318. steven says:

    Go to your download folder or wherever you saved the restore file and just drag it to your desktop and choose it from there. DO NOT NEED itunes for this.

  319. steven says:

    Damn indians, gtfo the internet and go blow soemthing up.

  320. kamath says:

    hi,

    i am from india. i just bought a jailbroken iphone 3gs, bb 6.15.00; old bootroom; ios 4.1. i decided to upgrade to ios 6.0.1 using redsnow which was when the power went off. i didnt back up my phone in itunes.

    now i am stuck in recovery mode; and when ever i connect to itunes it starts restoring but then error 21, 3194 or 1602 comes. also it shows a blank next to the iphone (regarding details).

    when i try redsnow to load 6.0.1 it says error start normal rebooting. if i try to load 5.1.1 it says eroor: panic you are in loop.

    i would like to have the latest firmware on iphone; please guide me through.

  321. Jack says:

    If you failed here and even after jailbreak you see No Service or No Sim try the alternate way of IMEI unlocking.

  322. marco says:

    if u have iOS 6.0.1 download the 6.0 ipsw, not the 6.0.1, its supposed to work that way

  323. Hans says:

    The 3 ipsw is the file for iphone 4 in the list

  324. Nargis says:

    I have iPhone2,1_6.0.1_10A523
    redsnow doesnt support this please someone tell me what to do ,I already extract this ios on my iphone and it doesnt work it says I have to activate it with sim I dont have supported sim please someone tell me what to do ,I am stuck :'(

  325. Rafael Cantarela says:

    If I do this procedure, I will unlock my IPhone too?
    Or to unlock Will I have to do another process?

    Thanks

  326. Dimitar says:

    I have a serious prob! I put my device in recovery mod open redsnow , I do the steps like its said but when i have to finally press the jailbreak button little window opens and says “Your Iphone 4S is connected in the wrong mode . Put it in its normal operating mode ” Someone please help me I’m with Iphone 4S with ios 6.0.1

  327. K-PLus says:

    I got 3GS Old bootrom 6.0.1 but i cant JBU. It’s JBT. Can you help me?

  328. Raman says:

    Iphone 4g ios6.0.1
    Cydia Is installed but after rebooting Iphone the cydia not opening

  329. Raman says:

    Iphone 4g ios6.0.1
    Cydia Is installed but after rebooting Iphone the cydia not opening

  330. wen says:

    borrow someone that has AT&T sim to activate just a second. your phone is not factory unlock probably. go to ebay to get your phone unlack under $10.

  331. Sxmmach says:

    For updates follow me on twitter: @Sxmmach

  332. Justin says:

    Ok so i never get the running pineapple in the first part of the jailbreak but it goes all the through to the second pineapple that has a bite out of it. Please help

  333. Mojo says:

    been waiting for 15 mins for it to Reboot..it still says waiting for reboot…wat do i do now :(

  334. Payton says:

    I jailbroke it and did the just boot but there is no cydia

  335. cj says:

    I also have the same problem, I was stuck at the “please wait loop” for 15 minutes, then after random text appear at an incredible speed, Iphone reboot and I’m back at the apple logo. HAHA. I suck n doing this jailbreak thingy.

  336. Jamesdt says:

    Hey guys,
    I successfully jailbroke my iPhone 4 6.0.1 (AT&T) today. I had some trouble at first so in case anyone else is having trouble here are a couple tips.

    First, if you get the missing keys.plist error when you try and “Just Boot” then look on the right hand side of this page. There is a useful link there which will rid you of your troubles. The steps may seem meaningless but hey, whatever works, and this did for me.

    Secondly if you try and jailbreak but your “matrix” screens gets the the Please Wait.. part and just goes on endlessly shut off your device, download the ispw that starts with “Iphone 3,1″ which should be the global version. This also worked for me. YES Iphone “3”.. Its just the way they titled it, no worries, we know you have an iPhone 4

  337. Ignacio says:

    Thanks man! Thats accurate.

  338. B says:

    MI’m stuck at waiting to reboot. It says i’m missing keys.plist

  339. Kelly says:

    Me too!
    What now?

  340. Sourabh says:

    I am using ipod touch 4th generation. The jaibreaking part worked out perfectly, but after the process of the “Just Boot”, my ipod hangs with a blank,dim lighted screen, How to solve this problem?

  341. gmaster says:

    try this, go back to select Ipws then try just boot in dfu mode.

  342. bar says:

    when i select ipsw it says that this version of redsn0w not support by this version of redsnow what should i do ? i have the newest redsnow 15b3
    what should i do ? :(

  343. Gaurab says:

    Open red snow as admin.then select extras >select Ipsw .now you have to select the downloaded ios6 Ipsw not iOS 6.0.1ipsw.then go back and select jailbreak. then everything goes fine. Here u select iOS 6 Ipsw because redsnow is still incompatible with ios6.0.1.

  344. Gaurab says:

    look at my comment posted on 15 January

  345. garrett says:

    how do i open as an administrator

  346. Thomas says:

    On windows u right click and u see run as administrator :)

  347. Thomas says:

    Do i need to downgrade my ios to6.0?? im at 6.0.1

  348. Thomas says:

    my cydia sources is empty,and yes i’ve added 10 of’em

  349. Tom says:

    I’ve jailbroken my ipod touch and done a just boot and cydia hasn’t appeared
    Please help

  350. Tom says:

    i have jailbroken my ipod touch 4 and have don a just boot and cydia is still not on my ipod

  351. Timoty says:

    Run the jailbreak on iphone 4s?
    and my power button is defect what can i do?

  352. Jerome says:

    I have jailbreaked my ipod touch (4G) and i have cydia, but cydia doesn’t load the store. Can anyone help me?

  353. Darien says:

    I jailbroke my ipod 4g ios 6 with this and appsync doesn’t work. Keeps saying invalid ipa when I try to install a file. I’ve installed and uninstalled with no success. Any ideas?

  354. dillon says:

    that doesnt work

  355. ddrium says:

    i already jailbroken mine and have cydia , but when i download some things and after restarting it , cydia and instalous just crash , so i go back to redsnow (admin) pick the ispw and reboot it , and when its finishing the reboot it says the missing keys.plist data ~~
    any ideas of how to fix that? i just want to get whatsapp for my ipod :/

  356. ddrium says:

    conect it> turn it off > open redsnow as admin >extras >select ipsw > just boot.

  357. Ivan says:

    This is how I upgraded and jailbroke my iPhone 3GS iOS 4.1 to 6.0.1 without upgrading baseband:

    1. I downloaded IOS 6.0.1 for iphone 3gs – (iPhone2,1_6.0.1_10A523_Restore IPSW)
    2. I downloaded sn0wbreeze-v2.9.7, set up compatibility to XP SP3, and ran as administrator.
    3. I picked my original (not custom) IPSW and picked Baseband Preservation Mode.
    4. Snowbreeze created a custom IPSW.
    5. Then enter PWD mode in snowbreeze.
    6. I opened iTunes, clicked shift and restore, picked the custom IPSW and restored to ios 6.0.1 without any errors.
    7. When the phone was restored I couldn’t pass the activation page.
    8. To make it through activation – I downloaded original ios 6.0 for iphone 3gs (iPhone2,1_6.0_10A403_Restore IPSW) – because redsnow can only work with ios 6.0, but not ios 6.0.1 (but I restored to 6.0.1 , that’s the trick that worked).
    9. I opened redsnow 0.9.15b3 (compatibility XP SP3, ran as administrator), I went to Extras -> Select IPSW and chose ios 6.0.
    10. Then I went to Jaibreak, checked install Cydia and that’s it.
    11. After it’s done when you turn on your cell phone, there will the activation page, but that’s ok, there is no need to have a sim card, it’s painless.
    12. Now you have your phone working.
    13. BTW I saved blobs on my computer for ios 4.1 for my iphone 3gs.

  358. Rein says:

    Hi, i got an iphone 3gs with a new bootrom (redsnow says it has), and i’m unable to jailbreak it. i’m following the instructions and i’m always prompted to perform a clean turn off then retry redsnow again. i’m using red snow 9.15b3… can anyone help me on this?

  359. Blake M says:

    how do you run as admin on a mac?

  360. Emmanuel says:

    i think as a usefully comment.
    when you speedup. i think a lot of people wonder how much time passes….
    how about putting a clock next to the iphone, so we can know how much time is passing by

    thats all
    cheers

  361. Patrick says:

    I got it to the code part, then its stuck it please wait…

    I dont know what the problem is, i have tried different ports and cables. its not booting to the pineapple logo:( help please!

  362. Chris says:

    my cydia worked fine. then i went to download winterboard and after i had to reboot it cydia and winter board wouldent open. what do i do?

  363. JORDI says:

    exploting with limera1n stuck ?

  364. Bojan says:

    Can someone answer, please. Can I use this to JB my iPhone 4 A1332 with 04.12.02 firmware.

  365. Lani says:

    is jailbreaking you ipod touch 4g 6.0.1 free?

  366. SE says:

    I run redsn0w as an admin.
    I’m fine with jailbreaking but stuck at rebooting.
    it says : missing key.plist.

  367. itc says:

    Thanks,

  368. Andreas says:

    When i try to do as said, installing the firmware, choosing the firmware i downloaded in Redsn0w, and then press jailbreak, putting the phone in DFU Mode, and then the process starts. But then all of a sudden it stops and says “Exploit failed”

    What shall i do?

    Thanks in Advance, Andreas

  369. Max says:

    i installed the jailbreak stuff but when i tried to “just boot” to start tethered my ipod wont reboot. redsnow says it waiting for it to reboot but its not how long does it take?

  370. asdf says:

    im stuck at the reboot, how long does this take or has it frozen????

  371. saad says:

    sooo nice

  372. Alexander says:

    thx man this is working

  373. what? says:

    my ipod keeps getting stuck on uploading first stage, what do i do?

  374. Robert, they vary. It’s up on the authors. Many of the letters coming up are handwritten, or hand-notated, it’s about half and half. Though most of the first letters were typed. The fourth letter was a comic.

  375. I just want to say I am just beginner to blogging and absolutely savored your page. Most likely I’m planning to bookmark your website . You absolutely come with beneficial article content. Thanks a lot for sharing with us your web-site.

  376. great site says:

    I just want to tell you that I’m all new to weblog and seriously liked you’re blog. More than likely I’m likely to bookmark your site . You amazingly have excellent articles and reviews. Regards for sharing with us your blog.

  377. Hey there! Someone in my Myspace group shared this website with us so I came to take a look. I’m definitely enjoying the information. I’m book-marking and will be tweeting this to my followers! Fantastic blog and outstanding design.

  378. Hi there! I know this is kinda off topic but I’d figured I’d ask. Would you be interested in trading links or maybe guest authoring a blog article or vice-versa? My blog discusses a lot of the same topics as yours and I feel we could greatly benefit from each other. If you might be interested feel free to shoot me an e-mail. I look forward to hearing from you! Terrific blog by the way!

  379. I absolutely love your blog and find most of your post’s to be what precisely I’m looking for. can you offer guest writers to write content in your case? I wouldn’t mind producing a post or elaborating on a lot of the subjects you write in relation to here. Again, awesome website!

  380. Greetings from Ohio! I’m bored to death at work so I decided to check out your site on my iphone during lunch break. I enjoy the information you provide here and can’t wait to take a look when I get home. I’m amazed at how fast your blog loaded on my mobile .. I’m not even using WIFI, just 3G .. Anyways, good blog!

  381. I’m not sure why but this blog is loading extremely slow for me. Is anyone else having this problem or is it a problem on my end? I’ll check back later on and see if the problem still exists.

  382. First off I want to say great blog! I had a quick question which I’d like to ask if you don’t mind. I was curious to know how you center yourself and clear your head prior to writing. I’ve had a hard time clearing my thoughts in getting my thoughts out. I do take pleasure in writing but it just seems like the first 10 to 15 minutes are lost just trying to figure out how to begin. Any recommendations or hints? Thank you!

  383. Hello there! I know this is kind of off topic but I was wondering which blog platform are you using for this site? I’m getting sick and tired of WordPress because I’ve had problems with hackers and I’m looking at options for another platform. I would be great if you could point me in the direction of a good platform.

  384. safety signs says:

    Hello there! Do you use Twitter? I’d like to follow you if that would be okay. I’m undoubtedly enjoying your blog and look forward to new posts.

  385. Hi there! This is my first visit to your blog! We are a group of volunteers and starting a new project in a community in the same niche. Your blog provided us beneficial information to work on. You have done a wonderful job!

  386. orangeries says:

    My coder is trying to persuade me to move to .net from PHP. I have always disliked the idea because of the costs. But he’s tryiong none the less. I’ve been using WordPress on a variety of websites for about a year and am concerned about switching to another platform. I have heard fantastic things about blogengine.net. Is there a way I can transfer all my wordpress content into it? Any help would be really appreciated!

  387. Heya! I’m at work browsing your blog from my new iphone! Just wanted to say I love reading your blog and look forward to all your posts! Keep up the great work!

  388. At this time it appears like Drupal is the preferred blogging platform out there right now. (from what I’ve read) Is that what you are using on your blog?

  389. Please let me know if you’re looking for a author for your weblog. You have some really great articles and I believe I would be a good asset. If you ever want to take some of the load off, I’d absolutely love to write some material for your blog in exchange for a link back to mine. Please shoot me an email if interested. Cheers!

  390. home buying says:

    Good day! I could have sworn I’ve been to this blog before but after checking through some of the post I realized it’s new to me. Anyhow, I’m definitely delighted I found it and I’ll be bookmarking and checking back often!

  391. Incredible! This blog looks just like my old one! It’s on a completely different subject but it has pretty much the same page layout and design. Outstanding choice of colors!

  392. Hello are using WordPress for your site platform? I’m new to the blog world but I’m trying to get started and create my own. Do you require any html coding knowledge to make your own blog? Any help would be really appreciated!

  393. Hey there! I know this is kind of off topic but I was wondering which blog platform are you using for this website? I’m getting fed up of WordPress because I’ve had problems with hackers and I’m looking at options for another platform. I would be awesome if you could point me in the direction of a good platform.

  394. Thanks for the marvelous posting! I truly enjoyed reading it, you will be a great author.I will make sure to bookmark your blog and may come back in the future. I want to encourage one to continue your great job, have a nice weekend!

  395. Hey! This is my first comment here so I just wanted to give a quick shout out and tell you I truly enjoy reading through your articles. Can you recommend any other blogs/websites/forums that deal with the same subjects? Many thanks!

  396. Howdy are using WordPress for your blog platform? I’m new to the blog world but I’m trying to get started and create my own. Do you require any coding knowledge to make your own blog? Any help would be really appreciated!

  397. Howdy! This post could not be written any better! Reading through this post reminds me of my previous room mate! He always kept talking about this. I will forward this page to him. Fairly certain he will have a good read. Thanks for sharing!

  398. I am curious to find out what blog system you have been using? I’m having some minor security problems with my latest site and I’d like to find something more risk-free. Do you have any recommendations?

  399. Thanks for ones marvelous posting! I quite enjoyed reading it, you could be a great author.I will be sure to bookmark your blog and will often come back at some point. I want to encourage yourself to continue your great work, have a nice day!

  400. Hello, i read your blog occasionally and i own a similar one and i was just wondering if you get a lot of spam responses? If so how do you prevent it, any plugin or anything you can suggest? I get so much lately it’s driving me crazy so any support is very much appreciated.

  401. I really like what you guys tend to be up too. This kind of clever work and reporting! Keep up the great works guys I’ve incorporated you guys to blogroll.

  402. Today, while I was at work, my sister stole my apple ipad and tested to see if it can survive a 40 foot drop, just so she can be a youtube sensation. My iPad is now broken and she has 83 views. I know this is completely off topic but I had to share it with someone!

  403. Sweet blog! I found it while searching on Yahoo News. Do you have any tips on how to get listed in Yahoo News? I’ve been trying for a while but I never seem to get there! Cheers

  404. Hello would you mind letting me know which hosting company you’re using? I’ve loaded your blog in 3 completely different internet browsers and I must say this blog loads a lot quicker then most. Can you recommend a good internet hosting provider at a reasonable price? Thank you, I appreciate it!

  405. poodles says:

    Woah! I’m really digging the template/theme of this site. It’s simple, yet effective. A lot of times it’s difficult to get that “perfect balance” between usability and appearance. I must say that you’ve done a great job with this. Also, the blog loads extremely fast for me on Opera. Excellent Blog!

  406. Exceptional post however , I was wanting to know if you could write a litte more on this topic? I’d be very thankful if you could elaborate a little bit more. Cheers!

  407. Howdy just wanted to give you a quick heads up. The text in your content seem to be running off the screen in Ie. I’m not sure if this is a formatting issue or something to do with web browser compatibility but I figured I’d post to let you know. The layout look great though! Hope you get the issue fixed soon. Kudos

  408. Yesterday, while I was at work, my cousin stole my iPad and tested to see if it can survive a 30 foot drop, just so she can be a youtube sensation. My apple ipad is now destroyed and she has 83 views. I know this is entirely off topic but I had to share it with someone!

  409. Hmm it appears like your blog ate my first comment (it was extremely long) so I guess I’ll just sum it up what I submitted and say, I’m thoroughly enjoying your blog. I as well am an aspiring blog writer but I’m still new to everything. Do you have any recommendations for first-time blog writers? I’d really appreciate it.

  410. This design is incredible! You certainly know how to keep a reader amused. Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Great job. I really enjoyed what you had to say, and more than that, how you presented it. Too cool!

  411. Hi there! I’m at work browsing your blog from my new iphone 4! Just wanted to say I love reading your blog and look forward to all your posts! Carry on the excellent work!

  412. It’s a pity you don’t have a donate button! I’d most certainly donate to this fantastic blog! I guess for now i’ll settle for book-marking and adding your RSS feed to my Google account. I look forward to fresh updates and will talk about this site with my Facebook group. Chat soon!

  413. Whoa! This blog looks exactly like my old one! It’s on a entirely different topic but it has pretty much the same layout and design. Outstanding choice of colors!

  414. Greetings! This is my first visit to your blog! We are a collection of volunteers and starting a new project in a community in the same niche. Your blog provided us beneficial information to work on. You have done a wonderful job!

  415. moon shine says:

    Wow that was odd. I just wrote an extremely long comment but after I clicked submit my comment didn’t show up. Grrrr… well I’m not writing all that over again. Anyways, just wanted to say fantastic blog!

  416. web dds says:

    Hi! I’ve been following your weblog for some time now and finally got the bravery to go ahead and give you a shout out from Austin Texas! Just wanted to say keep up the fantastic work!

  417. Hey just wanted to give you a quick heads up. The text in your article seem to be running off the screen in Chrome. I’m not sure if this is a format issue or something to do with internet browser compatibility but I thought I’d post to let you know. The design look great though! Hope you get the issue solved soon. Kudos

  418. Howdy I am so thrilled I found your weblog, I really found you by error, while I was looking on Aol for something else, Regardless I am here now and would just like to say kudos for a marvelous post and a all round thrilling blog (I also love the theme/design), I don’t have time to look over it all at the minute but I have saved it and also added in your RSS feeds, so when I have time I will be back to read much more, Please do keep up the awesome work.

Leave a Reply

© 2014 Absinthe Jailbreak.com. All rights reserved. Site Admin · Entries RSS · Comments RSS
Powered by WordPress · Designed by Theme Junkie