Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G
Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G - iOS 6.0.1 firmware has been released by Apple today with many improvements and fixed bugs, A4 jailbreakers (iPhone 4, 3GS iPod 4G ) who are planning to update their devices to iOS 6.0.1 should take care that only the tethered jailbreak available for A4 devices other wise the A5 jailbreakers who are planning to update to iOS 6.0.1 it’s better to stay way from the update as there is no jailbreak available till now.
Dev team also have updated Redsn0w to version 0.9.15b3 this update doesn’t add support for iOS 6.0.1 firmware it’s only to fix bugs found on the latest version, but you can still point at the already supported iOS 6 firmware and successfully jailbreak iOS 6.0.1 on A4 devices only.
Supported devices
- iPhone 4.
- iPhone 3GS.
- iPod touch 4th generation.
How To Jailbreak iOS 6.0.1 On iPhone 4, 3GS, iPod touch 4G
Step 1: Put your device in DFU mode
- Hold down power button and home button both at the same time for 10 seconds
- After the 10 seconds release the power button and still pressing on the home button for another 10 seconds
Step 2: Connect your device to your computer.
Step 3: . Open RedSn0w folder after extracting it, and right click on redsn0w file and click “Run as administrator”
Step 4: Now you have to Click on Extras button
Note: Make sure that Redsn0w detects your device.
Step 5: Then Select IPSW button , and choose your iOS 6.0 firmware for your device.
Step 6: Your device should inform you that “The following build was identified”
Step 7: Then Go back to the “RedSn0w” welcome page and click Jailbreak button then Redsn0w will start processing.
Step 8: Now check on “install Cydia” as on the screen below and then click “Next” your Redsn0w will start jailbreaking.
Step 9: Once the jailbreak is complete you have to know that this jailbreak is tethered jailbreak so you have to place your device into DFU mode.
Step 10: Go back to the Redsn0w main page and click “Extra” button then click “Just boot”
Step 11: After the device reboots, you will see Cydia on the Home screen.
Video guide will show you how to jailbreak iOS 6.0.1 on iPhone 4, 3GS and iPod touch 4G
Be The First one Downloading UnTethered Jailbreak for iOS 6
Get Jailbreak Alert Free
*IMPORTANT : Check inbox for confirmation mail
Hey guys can anyone PLEEEAAASE tell me why i have to click Just Boot Everytime i turn off my ipod i dont want to plug my ipod into my computer and do this whenever my ipod dies. It would make my life A LOT easier.
This is a tethered jailbreak, which means you need the assistance of your computer to successfully reboot your iDevice.
You’ve to downgrade to 5.1.1 and then you don’t have to do that! than you ‘ve a untethered jailbreak
i cant install, redsnow says ” unsupported ipsw ” what must i do?
same thing for me
“Then Select IPSW button , and choose your iOS 6.0 firmware for your device.”
Work for me
I chose iOS 6.0 firmware for my device, when dowloaded it… and redsnow says the same…
I had 3Gs jailbroken with iOS 4.1, which was working fine. Tried upgrade to iOS 6.0.1 by:
1. Restore to ‘iPhone2,1_6.0.1_10A523_Restore’ using iTune 10.7
2. Choosing the ‘iPhone2,1_6.0_10A403_Restore’ IPSW, jailbreak using ‘redsn0w_win_0.9.15b3′.
3. Again using ‘iPhone2,1_6.0_10A403_Restore’ did just boot tethered.
4. Cydia shows 6.0.1
No error with above steps, but didn’t get service.
Then based on the suggestion, I tired:
5. Installed Ultrasn0w Fixer.
Still no luck, then tried:
6. Jailbreak again to Downgrade to iPad Baseband.
7. Using ‘iPhone2,1_6.0_10A403_Restore’ did just boot tethered.
8. Re-install Ultrasn0w Fixer.
Same.. No service still..
Please help
-Jeevs
u should install ulreasnow and ulatrasnow fixer and there is order, think first fixer then ultrasnow
Hi Anna,
I tried that and for a moment I got the service but then went to ‘No Service’ mode again..
Please help..
It looks you restore using stock firmware of iOS6.0, please try to preserve base-band (custom firmware) before restoring it.
have you turned disabled 3g? i had the same problem with my 3gs and once i disabled the 3g function i have service!!
EDIT
“HAVE YOU DISABLED 3G”
PLEASE HELP
i cant install, redsnow says ” unsupported ipsw ” what must i do?
you have to use the 6.0 firmware to jailbreak 6.0.1
Everything works until get to just boot! Then it has missing keys and etc. Just the boot part i have a problem with.
Hi, I am using the brand new iPod Touch 4G and try to jail break the device. When I am rebooting, the system shows:
“Missing Keys.plist data for this build”
Device: iPod Touch 4G
ECID: XXXXXXXXXXXXXXXXXXXXXXXXXXXX
Build: iPod4,1_6.0.1_10A523
I download the firmware iPod4,1_6.0_10A403 from here and I am sure I am using the 6.0 in stead of 6.0.1 to jail break.
I cannot reboot that means I cannot use it. Can you help me to solve the problem? Thanks in advance!
Oh, I find the solution! It’s alright now!
Can you help me please am also having the same problem keys.plist missing.
Thanks
Yeah can you help me also, I had that problem previously, changed the 6.01 back to 6.0 and now Im only receiving “Missing Keys.plist data for this build”
For everyone with the MISSING KEYS.PLIST ERROR
1. Exit redsn0w and turn off your phone and unplug it
2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
7. In redsn0w go to extras>>select IPSW (6.0).
8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!
Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0!
Thanks SO MUCH. My iPod has gone from 5.1 tethered to a missing keys.plist of that version. To having to restore it and finally its fixed again!
You are the f.king boss! Tmel4198 I’m in france, Iphone 4 is working! You need to make your website and scribe the REAL SOLUTION!! You’re the boss! <3 <3 Iphone4 is hard to jailbreak.
thank you :]
you rule! thx
Fell like a sir?
yes i do lol
Hey Guyz I have done the above procedure for my iPhone 3gs.. I have done successfully. But still I have the previous version…. please help
hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, plz help me to get out of it.
hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me to get out of it.
Ramanjeet* This has happened to me a couple times and if you just put it back into dfu mode and try the process over again it should work. And try holding the home button longer than usual. It works for me. Fresh restore and jailbreak will also fix
you have to use firmware 6.0 dude not the 6.0.1! 6.0.1 is already on your iphone you must be fully updated and download the 6.0 firmware for the jailbreak to work, it still keeps the 6.0.1 on your phone
dont read my first comment that ment to go to the other thread where you asked about stuck apple logo
I have tried doing this jailbreaking several times. Every time after matrix page, after putting my phone in DFU mode, and going to extra boot thing, redsnow stucks at saying waiting for reboot and thats it nothing happens !!!!!!!!! Need Help !!!!!!!!!!
thanx dude
hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me to get out of it.
hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3 and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message ipsw is not supported by this version of redsnow, please help me
ITS THE 6.0 IPSW, not 6.0.1, your phone needs to be on 6.0.1 and you use the 6.0 ipsw to jailbreak 6.0.1.
why? because redsn0w doesnt support 6.0.1 yet
I used 6.0.1. ipsw files bus i got it same problem.
pls give me a perfect Solutions.
did you not read my comment right above yours? you use the 6.0 IPSW it says it right in the instructions!
DOWNLOAD THE 6.0 IPSW not the 6.0.1 IPSW
your phone will stay on 6.0.1, it just needs the 6.0 to jailbreak it
Thanks it worked dude!!
no dude… sorry it didnot work… according to redsnow it did.. but there’s no cydia icon on my ipod!
hello can we jailbreak A5 devices or not or is there at least a tethered jailbreak coming our for A5 devices can i jailbreak A5 devices tethered or untethered
hello can i jalbreak this version 6.0.1 (10A523) can i ajilbreak this
is that a serious question? that is what this thread is about, jailbreaking 6.0.1 with the 6.0 IPSW
on my ipod touch 4th gen
hello i did it i put it in dfu mode after that when i opened redsn0w it just opened as it was being identified and the keys were missing
For everyone with the MISSING KEYS.PLIST ERROR
1. Exit redsn0w and turn off your phone and unplug it
2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
7. In redsn0w go to extras>>select IPSW (6.0).
8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!
Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0!!!!!!
I’ve sucessfully jailbreak and Just Boot process. But when my Iphone 4 boot up with the Pineapple logo then show up the Apple Logo and stuck there, what’s happen? please help.
Hi …
I’m using iPhone 4 CDMA, I’m satisfied with this tutorial. Jailbreak = success. Thanks:)
hi i’m tying to jailbrake my iphone 4 version 6.0.1 (10A523) by redsn0w_win_0.9.15b3
and when im trying to put iPhone3,1_6.0.1_10A523_Restore.ipsw every single time i have message:
This ipsw is not supported by this version of redsnow!!
Fingerprints xxxxx.xx.xx.x.xxx
Please help me!!!
man, u need to download the 6.0_10A403 to jailbrake the 6.0.1:)
lol i love how no one pays attention to that
I have an iPhone 4 with 6.0.1 i just used RedSn0w 0.9.15b3 and iPhone3,1_6.0_10A403_Restore file. It seemed like the Jailbreak all went well. I saw the Pineapple and “installing bundles” message complete then said rebooting. When the iphone 4 rebooted. i dont have Cydia… What went wrong… or did i miss a step.. please and thanks.
You just did an tethered jailbreak, that’s mean that every time you turn off your iphone or the battery drain out you have to open redsnow>extras>just boot to recover your cydia, that’s the meaning of Tethered. We’re expecting the untethered release to avoid this.
You have to select the 6.0 IPSW by going to redsn0w>extras>Select IPSW
Then go back and “Just Boot”
you must do this everytime you reboot your phone because it is a tethered jailbreak
Hi. i’m trying to jailbreak my ipod touch 4g with ios 6.0.
well it was started perfect but in the jailbreaking (matrix mode) the screen was stopped with the last code line as
” Bug in libxpc: Could not set context on Mach port! ”
please help me how could i jailbreak it
Tell me what you did in order to jailbreak it. Be really detailed.
restore and update your ipod touch 4g to 6.0.1 then use my instructions to jailbreak it.
For everyone with the MISSING KEYS.PLIST ERROR
1. Exit redsn0w and turn off your phone and unplug it
2. Plug your phone back in and then enter DFU mode without opening redsn0w yet. DFU=(3 sec lock button, 10 sec home and lock button, 15 second just home button).
3. Once in DFU mode, find redsn0w on your computer, right click on it and take ownership/run as administrator!
4. Open redsn0w, go to Extras>>Select IPSW>> select the 6.0 IPSW.
5. Go back, Jailbreak! let it do its thing and install cydia and then once the jailbreak is done and phone booted on, turn off your phone.
6. Exit redsn0w, unplug your device, plug it back in and put the phone into DFU mode! Open redsn0w!
7. In redsn0w go to extras>>select IPSW (6.0).
8. Extras>>Just Boot>> This is the only fix for the missing keys.plist error!!
Just an addition to any confusion as to why the just boot wont work after a successful jailbreak and lets say you install a tweak which require you to boot like winterboard! You must always go back and select the 6.0 ipsw every time you Just Boot because it will throw that ugly missing keys.plist error at you ,if not that, it just wont successfully just boot unless selected ipsw is 6.0…
To follow your instructions step by step has no worth. How can you find the IPSW files? It is not included in this “step by step” instruction. There are no straight forward answer to find here. In the video you also find it after pressing “Select IPSW”. But where are these files and where can I find them? The only thing happening is that the program let me to choose where the location of the files are… but where are they? This means I am stuck and can not go further. Please include this IPSW step in your guide if you want to make it “step by step”.
Hi. I have exactly the same problem. My windows 7 “offers” only to find IPSW files somwhere in my comp. But I have no idea where to find them. On all the videos and instructions both IPSW files are automatically offered for choosing, but this doesn´t work on my comp.
you download the 6.0 IPSW from this website for your specific iDevice. the 6.0 IPSW is used to jailbreak 6.0.1
do not download 6.0.1 IPSW
redsn0w doesnt support 6.0.1 yet so you use the 6.0 IPSW to jailbreak. Your phone will still be on iOS 6.0.1
6.0 IPSW = IOS 6 firmware? If I uderstand it correctly I should “downgrade” my new Ipad (already IOS 6.0.1 installed) to IOS 6 and then redsnOw works? Is there any risk to damage Ipad by downgrading? thanks a lot
what? you need to be on 6.0.1 to jailbreak it…you just use the 6.0 IPSW and not the 6.0.1, but your iDevice will stay on 6.0.1
this is not for ipads anyways read the title
cancel reply
Noobs should not do any jailbraking because they always ask stupid questions like ( why do i have to plug in my device every time my device dies?) look at the the instructions and read it all befor you do anything that you might regret and have an expencive paper weight
haha i totally agree i am always helping everyone on this website but get nothing in return which sucks, i guess i am just a nice guy! it is not hard at all to figure the stuff out your self. you know?
does anyone use google anymore or youtube?
I am having a similar problem with Cydia not showing up post “Just boot”
Iphone 4 6.0
Followed process to jailbreak from 6.0 to 6.01
ReEntered DMU and selected IOS 6.0 to bypass playlist error.
Selected “Just Boot”
Iphone restarts but there is no sign of Cydia.
Any tips would be great.
did you even jailbreak hahaha
Thank you
Hi. i jail broke my iPhone but then when i try and reboot. It says missing key.plist or something like that. Does anyone know what the problem might be?
Regards
Help is much appreciated
my instructions about missing keys.plist fix works great. it is posted on this website but i cannot link it in this comment for some reason! go to the home page and look on the right side where it says Absinthe Jailbreak Forum, it is the second post,
cheers
I connect my iphone 3gs and follow the steps to extra and then I select IPSW and no firmware files shows up. What I’m I doing wrong?
you have to find where you downloaded the firmware….
Hi I had this problem also, any suggestions on where to find this?
Heey guys please help. My phone is restarting it self constantly.
I’ve jailbroken my iPhone 4 a couple times but this time something went awfully wrong. I jail broke my phone exactly like in the descriptions with redsnow and the iOS 6.0 ipws and I saw the pineapple and rebooted……the whole procedure….well, now I still don’t have cydia on my phone and it is restarting itself on and on and on and on again. and that makes it even impossible to set it back with iTunes.
please help, pleeaase
Hello, this worked for me because i have been in the same situation before.
1st. you have to hard reset your iPhone by holing the power and home button for 10 seconds, but because the reboot state your phone is in you must hold for an additional 5 seconds so it will shut off twice.
2nd. Once it is fully off and not turning on by itself. hit the power button and do another 10 second power and home button hard reset but once it turns off let go of the power button and keep holding the home button to put the iPhone into recovery mode, you will see>(iTunes symbol with the cable)
3rd. Restore your iPhone using iTunes
4th. Start from scratch and begin the jailbreak process over again but be careful to follow ever step precisely
I done everything but fail. I did’t get pineapple moving application please help
please be more specific
I can’t use redsnow 0.9.15b3 in iPod4,1_6.0.1_10A523_Restore, redsnow said “ipsw not supprted”. So I jailbreak with snowbreeze 2.9.7 and everything working flawlessly.
thats because you use the 6.0 IPSW and not the 6.0.1 which is explained in the instructions!
6.0.1 jailbreak requires the 6.0 IPSW because redsn0w doesnt support 6.0.1 yet but it still keeps your phone on 6.0.1
The “Just Boot” will finish and the pineapple will show on my screen, but once that disappears, the Apple comes up and doesn’t finish rebooting. Any tips on what to do?
1st. unplug iphone and Hard reset it by holding lock/power button and home button at the same time for 10 seconds or until you see the screen shut off!
2nd. without turning it back on, enter DFU mode without the phone plugged in! which is:
* 3 second power button!
* 10 seconds home and power button (once you see the screen power off you know you have 3.5 seconds left)!
* 15 seconds just home button!
3rd. Open redsn0w and click just boot
4th. Now plug phone in and it will auto start the Just Boot process!
If this does not work it means the jailbreak failed and your phone is in a sort of mobile substrate/crashed phase so you must restore and start over :/
Thank you so much great instructions!
HELP PLEASE!!! I tried to follow all the steps but when it (iPhone 4 GSM iOS 6.0.1) goes into matrix mode, it gets stuck on please wait… and it just keeps doing that all the way down until it eventually restarts by itself.
the only fix is a restore and rejailbreak
its did’t work on me too
any solution . please wait too long
restore and rejailbreak
hi guys is this also jailbreaks i phone 4S ? thanks
*Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G*
iPhone 4S has an A5 chip, this jailbreak is only for A4 chip devices
Jailbreak iOS 6.0.1 On iPhone 4, 3GS and iPod Touch 4G
no 4S, its only for A4 chip devices
Hi,
I’m trying to jailbreak my unlocked iPhone 4 running 6.0.1 firmware. I have the 6.0 firmware selected in extras, the iPhone is in DFU mode, I start the Jailbreak and it gets past the limera1n stage and to the upload stage and then stops and says Exploit failed, am I missing something? I’ve tried all possible types of firmware so I know it cannot be that. Thanks in advance
Exploit failed happens because you didnt follow step 3 of DFU mode correctly, you hold the home button even when the screen changes till you see “uploading first stage”…its 15 seconds, dont let go when it beggins jailbreaking at 8 seconds
I’ve tried putting the iPhone into DFU mode at all different stages of the process, before I run Redsnow, the initial screen of redsnow, just before I click the Jailbreak icon, after I click the Jailbreak icon etc. Yet I still get the same result. Ive restored the iPhone to a fresh 6.0.1 firmware and tried all of the above, to get the same result. Any help is much appreciated
1.use a different USB port on your computer.
2.make sure you have latest redsn0w.
3.use USB 2.0 drive and not 3.0, make sure your USB drivers are updated.
4.when following the last step of the DFU process you must keep holding the home button down even when the screen changes.
5.keep holding the home button until you see “uploading first stage” or “uploading second stage” during the jailbreak process
ios 6.0.1
Hello there
I am having Iphone 3GS and i upgraded to IOS 6.0.1 (Tethered). The phone and IOS is working fine but sometimes i loses signals even for hours and that happens mostly in the day from 8 am till 3 PM. Whereas in the evening or night, the signals are back, however sometimes also get interrupted in between. My Baseband is 6.15.00. Can anyone please advice me as i am in great frustration thus losing my signals at work all day long.
P.S this problem was also encountered in IOS 5.1.1
you have a 3GS, those phones are old and out of date. signal has nothing to do with software. it is most likely a hardware problem
Well the signals were working fine a month back. and neither i dropped set nor tempered with it. So there doesn’t seem any hardware issue. and if there was any, the signals would’ve gone permanently, not for short period of time.
I need JB for iOS 6 to my iPad 2 wifi. when will it be released?
Their isnt specific release days
hello, i’ve done all the stepts ypu’ve said, but I don’t still have cydia!! i don’t know what to do more…i’ve tried all :S
what iPhone do you have
i have the same problem i have 3gs iphone …please help
i’m trying to change my software to 6.0 to jailbreak as i have 6.0.1 but it isnt working? someone please help? ive downloaded it and done it via itunes but when i click on it nothing happens, and it just opens itunes but nothing more? PLEASE HELP! thankyou
UNTETHERED OR THETERED???????????????
Its tethered at the moment.
the IPSW is not supported by this version of redsnow.
How long is the reboot suppose to take? Ive been waiting hours.
Do I need baseband preservation before doing this jailbreak? Thanks!
I’ve done it but there is no cydia, apps store and some other icons. Now there is battery percent in my ipod 4…How to get appstore now in my ipod…????
Hi,
not exactly sure whats going on with my phone, it’s my first time jailbreaking anything. But i’ve done everything step by step, downloaded redsn0w, got the firmware for ios 6..everything takes but whenever i’m the the matrix mode it starts working perfectly for a minute, then i get a LOOONG row of please waits..stays on my screen for forever, no pineapple guy nothing..it just booted right back to my lock screen. I’ve restored my phone, tried to read forums on EVERYTHING. And i STILL cannot find what the problem is! PLEASE HELP ME! I have a Iphone 4..hopefully SOMEONE can help me, i’ve been messing around with this crap for almost 2 days, it’s getting tiring! Thanks so much
I’m having the exact same problem. I’ve restored iOS 6.0.1 about 10 times and tried to jailbreak over and over again but it keeps getting stuck at the ‘please wait…’ screen. Anyone have any ideas?!
Thanks,
Sabs
Hi I have problem. I every times stuck at Please wait… in matrix mode. Any solution ? I restore my iphone twice but i still stuck there…
i have an iphone 3gs and i have ios 6.0.1 and i followed the steps exactly and every thing is supposed to be done perfectly and redsnow says done and the iphone started well BUT i cant find cydia in the phone …please tell me where did it go wrong …..
ps: i used in the redsnow the ios 6.0 as said in the instructions
thanks guys your comments where very helpful and i found my problem and the solution …. thanks for being very helpful and wish you all a very succesful career … you have done an outstanding job .. keep it up
Hi Marwan
It looks like I have exactly the same issue as you had, but I was not able to fix it yet. The only hint I find everywhere is booting up using the “Just Boot” function, but that doesn’t fix it for me.
Could you maybe share how you were able to fix the problem?
Thanks
jan
A full restore fixed it for me – before this I just updated an already jailbroken iOS 5 to iOS 6, which didn’t seem to work.
Now the untethered Jailbreak on my 3GS with old bootrom is running fine
what horrible engrish you have
Hi! I followed everything but I can’t find the Cydia on the homescreen.
I think I installed it correctly because I have the same screenshot shown on your tutorial and everything goes well until the last part. Where can I find the cydia?
Thanks!
Hi
If you have any other device than a 3GS with old bootrom: Download redsn0w 0.9.15b1 (not b3) and start your phone using the “Just Boot” option found under extras.
If Cydia still doesn’t show up or you are on a 3GS old bootrom, you probably upgraded from an already jailbroken iOS 5 with Cydia on there. Try a full restore, that should fix it.
Cheers
Jan
Y esto es seguro??puede pasar alguna desgracia